Pagetop
PRODUCT GUIDE
COMPANY
INFORMATION
HOME E＞PRODUCT GUIDE
PolaSky POLARIZED LENS


（１）PolaSky I 　PC　POLARIZED　INJECTION　LENS
（２）PolaSky B PC　POLARIZED　BENDING　LENS
（３）PolaSky T TRI-ACETATE POLARIZED　LENS

PolaSky I The polycarbonate polarizing injection lens by the CFI process

It is a process of inserting pc polarized lens sheet and polycarbonate resin into a mould by the heat solvent injection. In the injection process, it is simultaneously added advanced function in the surface.
The polarizing films are covered and guarded by the pc polarized lens sheets and the function of polarization is kept unchanged even if the lens is inserted into a frame. For the details of the CFI process, see http://www.m-ep.co.jp/index.htm (the technology and service > processing technology > CFI introduction

（1） PolaSky I 　PC　POLARIZED　INJECTION　LENS
Material
Polycarbonate 　（PC)
Curve
６Ｒ　・　８Ｒ
Size
（TWO　PIECE）
７６Φ　Round type
The thickness：　〈６Ｒ〉２．２ｍｍ　　　／　　 〈８Ｒ〉Dec.　２．２ｍｍ〜１．７ｍｍ (±０．１mm)
Feature

1) Excellent impact resistance, which is incomparable in other plastic lenses
2) By CFI special process, pc resin and pc polarized sheet are injected
3) It is a epock-making excellent lens which has a good surface balance and no power
 		　
Color

Color
No.
Visible
％
Category


Degree of
polarization


Color
No.
Visible
％
Category
Degree of
polarization
Dark
Smoke
GS
１１．０
３
99%
 Copper
DR
 １７．０
３
 99%
Light
Brown
ＢBW
２０．０
２
99%


Smoke
Green

ＢＧＲ
１９．８
２
99%

　

Processing

1) The lens sheet with the protection cover (Heat Resistant)
2) Cutting
3) Bending
4) The CFI injection process
5) Hard coating
6) Inspection
7) Color matching
8) Shipment

Use for
　
Please select suitable lenses.
Remark
※Polarization is over 90%
※Ultraviolet ray transmittance is less than 0.1%
※Our lenses are all produced with Japanese lens material in Japan.

▲ It returns to page Top.

　


ＰｏｌａＳｋｙ Ｂ　 　ＰＣ　POLARIZED BENDING LENS

Highly efficient polycarbonate polarized bending lens.
It is epoch-making super highly efficient polarized lens sheet which is used as polycarbonate protective layer.
It has the high durableness and polarizability with rich color variation, easy processing and the strongest impact resistant.

Under the severe condition, it doesn't make defective appearance such as the lamination-off, the tear of polarizing device,
and is very excellent about the dimensional stability.
Please refer to our data below which we experimented.
The variability of the polarization is less than 1%. Also the color interference fringe is controlled by our special manufacturing method.

　The heat-resistant test 120°C
　１０００ hours
　The 80℃95%RH moisture resistance test
　１０００ hours
　The cold resistance test -20°C
　１０００ hours
　The carbon arc test
　　５００ hours
※ Above data are experimental values but not security values.

（2）PolaSky B PC　POLARIZED　BENDING　LENS
Material
Polycarbonate 　（PC)
Curve

４Ｒ・６Ｒ
（４Ｒ）・６Ｒ・８Ｒ
Size
（ONE　PIECE）
（TWO　PIECE）
Any size available (over 40mm a side)
　The thickness 　：　　１．５ｍｍ　

Feature

1) Excellent impact resistant lens, which is incomparable in other plastic lenses
2) Remove over 99% of Ultraviolet Rays
3) Many color variation

Color
Color
No.
Visible
％
Category
Degree of
polarization
Color
No.
Visible
％
Category
 Degree of
polarization
Light
Smoke
G-35
（M)

３５
２
90%
Brown


BW
（M)

１８
３
99%
　Ｓmoke
ＳＧ
（M)

２２
２
99%
Brown
BS
（M) 		１２
３
 99%
Smoke
GRYU
（M)

１６
３
99%
Dark
Green
G-１５
（M)
１６
３
99%
Dark
Smoke

ＮＧＹ
（M)

１０
２

99%
Green
MG
（M)
１７
３
99%
Dark
Smoke

ＧＳ
SM)

１１
３
99%
Light
Smoke
S-１３０１
（T)
２８
２
98%
Dark
Smoke

ＧＳＲ
（M)

１１
３

99%
Brown
B-６２２１
（T)
１８
２
99%
Dark
Smoke

ＧＲＭ
SM)

１４
３
99%
Dark
Brown
B-６１２１
（T)
１１
３
99%
Copper
DR
（M) 		１８ ２
98%
Yellow
Y-８３４１
（T)
３２
２
92%
process

1) The lens sheet with protection cover (Heat Resistant)
2) Cutting in various sizes
3) Bending
4) Peeling the protection cover off
5) Inspection
6) Color matching
7) Shipment
ｓ
Use
　
Please select suitable lenses
Remark
※Polarization is over 90%
※Ultraviolet ray transmittance is less than 0.1%
※Our lenses are all produced with Japanese lens material in Japan.
▲ It returns to page Top.


PolaSky T TRI-ACETATE POLARIZED　LENS

It is thinner and lighter in weight, and the bending process is easy.
It is a multipurpose inexpensive lens and used in various sunglasses such as a clip-on frame and an over glass or for
one-piece and two-piece.

　　　　　　　　　
（３）PolaSky T TRI-ACETATE POLARIZED　LENS
Material
Tri-acetate
Thickness

０．８ｍｍ　　　／　　　　１．０ｍｍ

Curve

４Ｒ・６Ｒ
４Ｒ・６Ｒ・８Ｒ
Size
（ONE PIECE）
（TWO　PIECE）
any sizes available

Feature

1)Thinner
2) lighter weight
3) Easy cutting
4) Reasonable price

Color
Color
No.
Visible
％
Category
Thickness
mm
Degree of
polarization
Color
No.
Visible
％
Category
Thickness
mm
Degree of
polarization
Light
Smoke
NC-82
(0.8)
４４
１
0.8
95%
Dark
Green
Smoke
NCS-1
（GS3)
７
４
0.8
99%
Dark
Smoke
NC-28
（0.8&1.0)
１７
３
0.8
1.0
99%
Light
Brown
NC-4
（B2)
２２
２
0.8
1.0
99%
Light
Green

NC-1
（0.8)

２７
２
0.8
99%
Dark
Brown
NCA-4
（B3)
１２
３

0.8
1.0
99%
Green
Smoke
NCS-3
(0.8&1.0)
１５
３
0.8
1.0
99%
Amber

NCY-4
（AMBER)
２２
２
0.8
1.0
99%
Process

1) The lens sheet with the protection cover (Heat Resitant)
2) Cutting in various sizes
3) Bending
4) Peeling the protection cover off
5) Inspection
6) Color matching
7) Shipment

Remark

※ Polarization is over 90%
※Ultraviolet ray transmittance is less than 0.1%
※Our lenses are all produced with Japanese lens material in Japan.

　　　 　　　　　　　　　　　　

ＳＡＮＫＯＨ CO.,LTD
株式会社　三興
 ＴＥＬ：81-７７８−５１−３２３８
ＦＡＸ：81-７７８−５２−２８０３
2-20-5,Kitano-cho Sabae-City
Fukui-Prefecture Japan 916-0029　　
〒９１６−００２９　 福井県鯖江市北野町２丁目２０−５　
 e-mail：info@sankoh-net.com